Double Stage Waste Plastic Granulator with Good Quality

Model NO.: RP
Cooling Type: Water Cooling
Stage: 2
Material: PE, PP
Trademark: Ruipai
Transport Package: PE Stretch Film
Specification: CE
Origin: China
Double Stage Waste plastic granulator With Good Quality

Double Stage Waste Plastic Granulator with Good Quality


Waste Plastics Recycling Machine is used for recycling of the used and waste plastic materials. It equipped with automatic constant temperature, clectric changing filter nets. It also can pelletize the crushing material after fitting with a loader. The cutting machine adopts speed regulating motor. which can cut the material according to the feeding speed of the extruder. With such features as high output, low noise, stable performance and easy operation .It is a more ideal waste plastic film regenerative. pelletizer.
 

model
SJ-C90 SJ-C100 SJ-C110 SJ-C120
Diameter of Screw 90 100 110mm 120
Major Diameter Ratio of Screw Stem 20:1-22:1(L/D) 20:1-22:1(L/D) 20:1-22:1(L/D) 20:1-22:1(L/D)
Ration Speed of Screw 10-110rpm 10-110rpm 10-110rpm 10-110rpm
Main Motor Power 22kw 30kw 30kw 37kw
Output 60kg/h 90kg/h 110kg/h 130kg/h
Machine Weight 3t 3.2t 3.5 3.7t
Overall Dimensions(L ×W ×H) 5800 × 1350 ×  1300 5900×  1350 ×  1300 6000 × 1350 ×  1300 6200 × 1350×  1300

  
Double Stage Waste Plastic Granulator with Good Quality
Double Stage Waste Plastic Granulator with Good Quality
Double Stage Waste Plastic Granulator with Good Quality

                                 

Cross Roller Bearing is a special type bearing. Because of the inner ring or outer ring were separated, after loading the roller and the cage, it is fixed with the cross roller shaft ring to prevent the separation, so the operation is simple when installing the cross roller shaft ring. Since the rollers are intersected, only one set of cross roller bearings can withstand the load in each direction, which is three to four times more rigid than the traditional model. At the same time, because the inner ring or outer ring of the cross Roller Bearing is a two-part structure, the bearing clearance can be adjusted, and even if it is preloaded, it can obtain a high-precision rotary motion. Moreover, because of its special structure, it is commonly used in industrial robots as joint bearings.

cross roller 1

The classification and model series of cross roller bearings are below:

RB type (outer ring segment)

RB series models for cross roller bearing, basic, inner and outer ring size is minimal to miniaturization, its structure is the outer ring is divided, the inner ring design is an organic whole, the inner ring spinning of high precision parts suitable for requirements.

RE type (inner ring segment)

The RE series is a new type of XRB design concept, which is the same size as the XRB type.The structure of the inner ring is the split type and the outer ring is one design, which is suitable for the parts with high rotating precision of outer ring.

RU type (inner and outer circle)

The RU series model is not required to be fixed flange and support base due to the processing of mounting holes.In addition, due to the adoption of the integrated inner and outer ring structure of the belt, the installation has little effect on the performance, thus achieving stable rotation precision and torque.Can be used for outer ring and inner ring rotation.

RBC type (outer ring segment)

The RBC series model (corresponding to the CRBC series of IKO company) is composed of the outer ring is the split type, the inner ring is one design, and the belt is fully loaded with roller bearings.Suitable for high rotation accuracy of inner ring.

CRBH type (inner and outer ring)

CRBH series model, outer ring and outer ring are integral structure, used for outer ring and inner ring rotation.

RA type (outer circle segmentation, ultrathin type)

The RA series model is the compact type that reduces the thickness of RB and outer ring to the limit.Suitable for areas with light weight and compact design, such as rotating parts of robot and manipulator.

SX type (outer ring segment)

The structure of SX series is similar to that of RB series. The outer ring is a two-part structure, which is designed with three spring card rings and the inner ring, which is suitable for the place where the inner ring has high rotation precision.

XRU08 type (inside and outside)

XSU08 series is similar to the RU series, and the inner and outer rings have been machined with holes, so no fixed flange and support seats are required.Due to the adoption of the integrated inner and outer ring structure, the installation has little effect on the performance, thus achieving stable rotation precision and torque.Can be used for outer ring and inner ring rotation.


We believe that we can supply the best service and price for your, hope to make a long-term cooperation with you. If you have any question please do not hesitate contact with us. We keep warmly welcome you visit us in any time.


Cross Roller Bearing

Cross Roller Bearing,Excavator Parts Cross Roller Bearings,High Precision Cross Roller Bearing,Thin Section Cross Roller Slewing Bearing

LUOYANG AUTO BEARING CO.,LTD , http://www.lyautobearing.com

Posted on