The Fortress Box Frame Slide Gate, crafted by TYMETAL, is a cantilever system engineered to withstand the forces of gravity and wind. Utilizing a robust box frame construction and stainless steel cable, it effectively manages lateral sway. The design incorporates diagonal cross members to enhance stability, particularly beneficial for single gates up to 60 feet wide, and doubles up to 120 feet, ensuring structural integrity under stress.
Constructed using 6063-T6 aluminum alloy extrusions, the primary members (top and bottom) feature a "P" shape, with each segment measuring at least 2 inches on a side and weighing no less than 1.6 pounds per linear foot. The vertical members vary between 2"x2" and 1"x2", spaced according to the overall height of the box frame, creating a structure with a width of 24 inches from outside to outside.
Each gate frame is fitted with an extruded aluminum alloy track welded to the primary member, enabling smooth operation. The gate is supported by four self-aligning, 4-wheeled, sealed lubricant ball-bearing truck assemblies. It also includes cross bracing made of 3/16" minimum diameter stainless steel cable for vertical adjustment.
For special applications requiring limited backspace or larger openings, telescoping or roller box frame gates are available options.
[Download Brochure]
---
**Operator Brochure**
**APeX Controller**
- UL325/UL991 compliant 24VDC control module
- Full-featured for access control, security, and entrapment protection
- Integral MegaCode receiver
- On-board 3-button station
**Heavy-Duty Braking**
- Double c-face, dual disk electromagnetic brake
**Heavy-Duty Components**
- Adjustable torque-limiter and heavy-duty pillow block bearings for smooth, reliable, quiet power transmission
- All models are rated for continuous duty
**Variable Drive Speed**
- Programmable variable speed controller for smooth gate operation and high gate speed
- Soft start and stop programmable
**Manual Hand Crank**
- Crank handle can be folded out and used for emergency manual operation to crank the gate open and closed
**Weather Resistant Cabinet**
- Galvanized steel cabinet with powder-coated finish; the removable front cover is hinged, gasketed, and lockable
- Standard Convenience Features: Power on/off button and exterior stop/reset button
**Direct C-Face Motor-Brake-Gear Box Drive**
- Designed for smooth and dependable power transmission
**Electrical**
- Diagnostic LED display for ease of setup and troubleshooting
- 1 HP industrial, continuous duty, 1 & 3 phase 56 frame motors
- Integral entrapment sensing system with digital set point for accurate adjustment and enhanced safety
- Built-in dual gate capability using 3-wire shielded cable
- 24V DC power available for access control accessories
- Continuous-tone entrapment alarm with reset button
- Integrated warning beeper during gate movement
**Mechanical**
- Heavy-duty 15:1 right-angle C-face gear reducer
- #50 roller chain and sprockets
- Heavy-duty steel chassis
- Heavy-duty pillow-block bearings
- Adjustable torque limiter
**Cautions**
- Automatic gates are not for pedestrians
- Operators are designed for vehicular traffic only; pedestrian traffic should always use separate gates
- UL 325 requires the use of contact or non-contact anti-entrapment devices
- ASTM F2200 requires that all exposed rollers are covered
[Download Operator Brochure] [Download Specification Section 32 31 00]
**Box Frame Cantilever Slide Gate System with TYM-VS2-1 Variable Speed Operator (Chain Link)**
**Part 1 – General:**
**1.01 Section Includes:**
- The work in this section shall include furnishing all labor, materials, equipment, and appliances necessary to complete all Fortress TYM-VS2-1 Box Frame Gate Systems required for this project in strict accordance with this specification section and drawings. The gate and operator shall be specifically designed to complement each other as a system and be provided by a single manufacturer. Components (operator from one source and gate panel from another) assembled at the job site to form a system will not be approved.
**1.02 References:**
- UL 325 Gate Operator Requirements
- ASTM F 2200 Standard Specification for Automated Vehicular Gate Construction
- ASTM F 1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates, Type II, Class 2
- American Welding Society AWS D1.2 Structural Welding Code
**1.03 Submittal:**
- Product Data: Provide manufacturer’s catalog cuts with printed specifications and installation instructions.
- Deliver two copies of operation and maintenance data covering the installed products.
- Shop Drawings: Supply shop drawings showing the relationship of operating systems with gate components.
- Certification of Performance Criteria: Manufacturer shall provide certification stating the gate system includes the following material components.
**Part 2 – Products:**
**2.01 Cantilever Slide Gate System Manufacturers:**
- Manufactured by TYMETAL, 2549 State Route 40, Greenwich, NY 12834 (800) 328 4283.
**2.02 Vehicular Slide Gate Operator TYM-VS2-1:**
- This model operates cantilever, overhead, or track gates.
- Capable of functioning with various accessories including radio controls, electro-mechanical locks, single and three button control stations, digital keypads, coded cards, sensing loops, telephone entry systems, and revenue control equipment.
- Utilizes 208/230 Volt AC single phase or 208/230/460 Volt AC three phase power, with a control voltage of 24 Volt DC.
**2.03 Gate Construction Details:**
- Fabricated from 6063-T6 aluminum alloy extrusions.
- Primary members are “P†shaped in cross-section, weighing not less than 1.6 lb/lf.
- End vertical members are 2â€x2â€, interior vertical members alternate between 1â€x1†and 1â€x2â€.
**Part 3 – Execution:**
**3.01 Site Inspection:**
- Examine final grades and installation conditions.
- Correct any unsatisfactory conditions before beginning work.
**3.02 Installation:**
- Install equipment strictly according to the company’s printed instructions.
- Conform to ASTM F 1184 standards for aluminum cantilever slide gates.
- Comply with ASTM F 2200 and UL 325.
**3.03 System Acceptance & Validation:**
- Test each system function.
- Ensure proper operation of safety devices and document training.
Note: TYMETAL reserves the right to modify and/or make changes as deemed necessary without previous notice.
**Box Frame Cantilever Slide Gate System with TYM-VS2-1 Variable Speed Operator (Ornamental)**
**Part 1 – General:**
**1.01 Section Includes:**
- Furnish all labor, materials, equipment, and appliances necessary to complete all Fortress TYM-VS2-1 Box Frame Gate Systems.
**1.02 References:**
- UL 325 Gate Operator Requirements
- ASTM F 2200 Standard Specification for Automated Vehicular Gate Construction
- ASTM F 1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates
**1.03 Submittal:**
- Product Data: Provide manufacturer’s catalog cuts.
- Shop Drawings: Include complete details of gate construction.
- Certification of Performance Criteria: Manufacturer shall provide certification stating the gate system includes superior performance and longevity components.
**Part 2 – Products:**
**2.01 Cantilever Slide Gate System Manufacturers:**
- Manufactured by TYMETAL, 2549 State Route 40, Greenwich, NY 12834 (800) 328 4283.
**2.02 Vehicular Slide Gate Operator TYM-VS2-1:**
- Operates cantilever, overhead, or track gates.
- Compatible with various accessories.
**2.03 Gate Construction Details:**
- Fabricated from 6063-T6 aluminum alloy extrusions.
- Includes ornamental pickets and picket fillers.
**Part 3 – Execution:**
**3.01 Site Inspection:**
- Inspect final grades and installation conditions.
**3.02 Installation:**
- Follow company instructions.
- Conform to ASTM standards.
**3.03 System Acceptance & Validation:**
- Test each system function.
- Ensure proper operation of safety devices.
Note: TYMETAL reserves the right to modify and/or make changes as deemed necessary without previous notice.
Dewatering Screen,Sand Dewatering Screen,Dewatering Screen Machine,Dewatering Machine
Jiangsu Zhongyou Machinery Co.,Ltd , https://www.jszycr.com