With the improvement of living standards, more and more people are beginning to pay attention to beauty, whether it is men or women. So, as our little partner CNC plasma cutting machine, do you need beauty beauty? The answer is yes. Today, Wuhan Naiba Digital Co., Ltd. explained to the majority of customers about the beauty of CNC plasma cutting machine:
The work place and working environment of CNC plasma cutting machines are comparatively bad and metal dust is relatively large. If the metal dust is too large, it will market the normal use of the cutting machine. Therefore, we must strengthen the maintenance and the maintenance of CNC plasma cutting machines in daily production and use, which is equivalent to our beauty and beauty. The beauty treatment of CNC cutting machine is divided into three phases:
Stage 1: Daily beauty and beauty 1. Before using CNC plasma cutting machine on every working day, the dirt on the machine tool and guide rails must be cleaned to keep the bed clean, and the gas source and power supply should be turned off at work, while emptying the machine tool belt. The remaining air.
2. Once the operator has left the machine for a long time, turn off the power to prevent non-professional operation.
3. When the operator is using the machine, pay attention to observing whether the horizontal, vertical guide rails and rack surfaces of the machine are lubricated, so that the lubrication is maintained.
Phase two, weekly beauty beauty 1. Weekly cleaning of CNC plasma cutting machines, horizontal and vertical guide rails, rack and pinion gears, and lubrication.
2. Check whether the horizontal and vertical wiper works normally. If not, replace it in time.
3, check all the torch is loose, clean the trash of the ignition gun, so that the ignition to maintain normal. Check whether the automatic height-adjusting device is sensitive and whether to replace the probe.
4. Check whether the plasma cutting nozzle and electrode are damaged, and whether the cutting nozzle and the electrode need to be replaced.
Stage three, month and quarter beauty beauty 1. Check whether there is garbage in the total air intake, and whether the valves and pressure gauges are working properly.
2. Check if all pipe fittings are loose and all pipes are not damaged. Tighten or replace as necessary.
3, check all the transmission parts for looseness, check the gear and rack meshing conditions, if necessary, make adjustments.
4. Loosen the tightening device and push the pulley by hand. Whether it is free or not, if any abnormal situation is adjusted or replaced in time.
5. Check if the clamping block, the steel belt and the guide wheel are loosened, and the steel belt is tight. Adjust it if necessary.
6, check the strong cabinet and operating platform, the fastening screws are loose, use a vacuum cleaner or hair dryer to clean the cabinet dust. Check if the connector is loosened. 7. Check the performance of all the buttons and selector switches. Replace them with damaged ones. Finally check the accuracy of the machine.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
This is machine is professional designed and fabricated for Air conditioner Case Forming, folding purpose.
PLC Smart controlling, Pneumatic or Air cylinder driven forming.
Big brand components for high quality building.
Shell Forming Machine, Air Conditioner Case forming machine, Air conditioner case Folding machine
Satis Products Co., Ltd. , http://www.satismachinery.com