Warranty:
3 Years for motor and controller. Solar panel 20 years (Optional).
Installation:
1. Wiring the pump
Connect a longer cable to the pump (size of cable must be at least 1.5mm²). Use the parts contained in the cable connector kit (heat-shrink tube and tape) to connect a longer supply wire to the pump. If you don’t have a heat gun to shrink the tube, the barrel of your soldering iron will do or you can use a butane torch but with great care so you don’t melt the insulation or set it on fire. Bare the insulation back as shown above.
A. Layout the components needed to make the join
B. Put the large diameter piece of heat-shrink over the main cable and then the smaller diameter pieces over the individual wires, keep the heat-shrink back away from the joints as you solder them. Any heat transfer will prematurely shrink the heat-shrink.
C. Slide the small heat-shrink over the soldered joints and heat using a heat gun or alternative heat source to shrink the sleeve down over the wires.
D. Wrap the tape over the sealed joints
E. Finally slide the large diameter heat-shrink over the completed joint and shrink to it.
Place the pump in water before you start wiring the controller box. This will allow the pump to go through the pre-conditioning required. Do not put the pump in its final position until you have tested it, unless it is easy to see and remove.
Solar Pump Control Box Features:
A. Low-voltage protection (Automatic)
B. Over-current protection (Automatic)
C. Protection for low water level in well (AB sensor)
D. Protection for full water level in tank (LH sensor)
E. Controlling running speed of motor (Speed regulator)
F. Delay working when full water in tank (A timer inside can delay working for 30 seconds when the tank is going to be full)
G. MPPT function (Maximum Power Point Tracking)
H. Battery is optional (Can be used with solar charger battery system)
[Image: Taizhou Luyuan Solar Water Pump, 3 Years Warranty Stainless Steel 304 PS1800 Price, Solar Pump]
[Image: Taizhou Luyuan Solar Water Pump, 3 Years Warranty Stainless Steel 304 PS1800 Price, Solar Pump]
[Image: Taizhou Luyuan Solar Water Pump, 3 Years Warranty Stainless Steel 304 PS1800 Price, Solar Pump]
[Image: Taizhou Luyuan Solar Water Pump, 3 Years Warranty Stainless Steel 304 PS1800 Price, Solar Pump]
This solar water pump is ideal for use in wells, providing reliable performance with clean water applications. Designed for durability, it operates efficiently using solar energy, making it an eco-friendly solution for water pumping needs. The DC pump technology ensures smooth and consistent operation, while the magnetic startup mechanism reduces wear and tear. With a powerful pumping capacity and advanced protection features, this pump is suitable for both residential and commercial use. The product comes with a 3-year warranty on the motor and controller, and the solar panel has a 20-year optional warranty. It is manufactured in China and meets international standards, with HS code 8413709190. The unit is packaged in a sturdy plywood case, ensuring safe transport.
Extrusion Aluminum Heat Sink
Extrusion Aluminum Heat Sink is a type of heat sink made from extruded aluminum. It is designed to dissipate heat from electronic components such as CPUs, GPUs, and power transistors. The extrusion process involves pushing heated aluminum billets through a die to create a specific shape. This results in a heat sink with a large surface area that can efficiently dissipate heat.Extrusion Aluminum Heat Sinks are available in various shapes and sizes to suit different applications. They can be straight, curved, or angled, and can have fins or other features to increase their surface area. The fins are usually arranged in a specific pattern to maximize the heat dissipation performance.Extrusion Aluminum Heat Sinks are lightweight and have excellent thermal conductivity, which makes them ideal for use in electronic devices. They are also corrosion-resistant and can withstand high temperatures without deforming or losing their structural integrity.Extrusion Aluminum Heat Sinks are commonly used in computers, LED lighting, power supplies, and other electronic devices that generate heat. They are an essential component in maintaining the optimal temperature of electronic components, which can improve their performance and extend their lifespan.
Overall, Extrusion Aluminum Heat Sinks are an effective and reliable solution for managing heat in electronic devices. They are easy to install and require minimal maintenance, making them a popular choice for manufacturers and designers.
Extrusion Aluminum Heat Sink,Aluminum Extrusion Heatsinks,Aluminum Heatsinks Extrusion,Aluminum Radiator Extrusion
Suzhou Remgar Metal Manufacturer Co.,Ltd. , https://www.remgaral.com