Marine Ship Docking Yokohama Fender

  • Model NO.: XC20160518001
  • Size: Diameter: 0.5m-3.0m Length: 1m-6m
  • Service Life: 10-20years
  • Marine Parts: Hinge
  • Certification: BV, ISO9001, CCS, CCC
  • Feature: Wear-Resistant
  • Trademark: XinCheng
  • Specification: working pressure is 0.05-0.08mpa
  • HS Code: 401694
  • Material: Natural Rubber
  • Payment: T/T L/C
  • Type: All Ships
  • Engine Type: Outboard
  • Capability: Water Rubber Hose
  • Load Capacity: >8000teu
  • Transport Package: Nuding or According to Customer Require
  • Origin: China
pneumatic rubber fender is the advanced anti-collision device for marine application in the world. It is made of synthetic nylon lines and
Compressed rubber sheet. With inner compressed air, it can float on the water and widely
Used as protecting medium. It is usually used as an important protecting medium to prevent
A collision in craft works and mooring works.
Marine Ship Docking Yokohama Fender

Pneumatic rubber fender can absorb large energy to lower the unit pressure which effect
On the surface of the ship. This advantage makes pneumatic rubber fenders widely used
As an ideal ship protecting device on large tankers, LPG vessels, ocean platforms, bulk
Carriers, floating constructions, large docks, harbors, etc.

XINCHENG is the leading enterprise in the line of Pneumatic rubber fender manufacturing.
Keep manufacturing in strict international quality standard by ISO1735-2002 and GB/ T21482-2002.
The outer rubber is made of rubber layers which are wearable, anti-aging, anti-tearing and high-intensity. The outer rubber protects reinforcements and liner from damage under bad
Environment.

,: ACCESSORIES
1, valve core
2, A set of valve pipe
3, Gas tube, pressure gage, repair tools and material
Marine Ship Docking Yokohama Fender
Marine Ship Docking Yokohama Fender
 Quality control and test
ISO9001: 2000SGS. 10.
We have passed ISO9001: 2000, SGS, china's top ten enterprises and top 10 famous brands
ISO1735-2002GB/T21482-2008.
Production and test based on ISO17357-2002 and GB/T21482-2008
, LR. CCS...
Customer's satisfaction is our duty. LR, CCS and other certificates are available to show you against your requirements.
,: Test images
size
D×L(m)		 Initial pressure(Po) is 0.05MPa Initial pressure (Po) is 0.08MPa
Weight
kg		 R(kN) GEA(KJ) Weight
kg		 R(kN) GEA(KJ)
0.5×1.0 25 64 6 25 83 8
0.6×1.0 32 74 8 32 96 11
0.7×1.5 50 137 17 50 178 24
1.0×1.5 80 182 32 80 235 44
1.0×2.0 100 257 45 125 335 63
1.2×2.0 120 297 63 165 386 86
1.35×2.5 165 427 102 226 554 140
1.5×3.0 315 597 153 370 751 211
1.7×3.0 405 639 191 436 830 263
2.0×3.5 590 875 308 632 1138 424
2.5×4.0 1050 1381 663 1110 1815 925
2.5×5.5 1333 2019 943 1410 2653 1317
3.0×5.0 1880 2104 1210 2155 2709 1571
3.0×6.0 2160 2583 1485 2470 3292 1888
3.3×4.5 2020 1884 1175 2300 2476 1640
3.3×6.0 2300 2783 1675 2600 3652 2338
3.3×6.5 2700 3015 1814 3080 3961 2532
Height: the height of rubber fendernon- coxcombing,
Inaccuracy of weight: ±10% Inaccuracy of reaction force: ±10%

SLA-Stereo Lithography Appearance technology, using photosensitive resin 3-D printing materials: milky white texture, good strength, but relatively small toughness, small and thin brittle fracture, but easy to grind, electroplating, painting and coloring. Photosensitive resin is composed of two parts, namely photoinitiator and resin (resin consists of prepolymer, diluent and a small amount of additives). The amount of photoinitiator and diluent has an important influence on the curing speed and quality of photosensitive resin. When the proportion of photoinitiator and diluent is appropriate, not only the curing speed is fast, but also the curing quality is good. Therefore, in order to select large brand manufacturers, mature and stable photosensitive resin 3D Printing materials are very important. In terms of performance, there are also some imported photosensitive resin materials with high strength, transparency, high temperature resistance, moisture resistance and waterproof functions. In addition, three-dimensional printing materials of composite ceramics, such as alumina (AI2O3) m zirconia (ZRO2), hydroxyapatite (HAP), tricalcium phosphate (TCP) and so on, which are similar to high-resolution ceramic powder and photosensitive resin, can be selected. 

Stereolithography

Electric Power Tools,Rapid Prototype Plastic,Stereolithography 3D Printer,Customized Rapid Prototype

Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com

Posted on