After the start of the new medical reform in 2006, the industry ushered in a new historical period. Under the influence of many fundamental factors such as industrial upgrading, import substitution, changes in population structure, changes in disease spectrum, and medical reform, diversified strategic appeals, fierce competition in the industry, and capital strength have become catalysts for industry consolidation, with endogenous characteristics and externalities in the industry. Under the joint action of the environment, leading companies in the field of medical device segmentation in China have landed on the capital market.
Moreover, listed companies have also maintained a relatively rapid growth rate, which has greatly exceeded the global medical device industry growth of about 5%. However, from the perspective of the global proportion of China's medical device industry or the market value of medical device listed companies, the gap between China's medical device industry and the world's advanced level is obvious.
The Medical Device Innovation Network follows the listing footprint of medical device companies from the 1990s to 2012 and provides an overview of the ups and downs of the medical device industry. At present, there are more than 30 listed companies in the global capital market that use medical devices as their main business.
At the same time, the medical device industry has its own particularity and is more obviously affected by the national policy. Medical device companies also show their own development curve with the development of China's economic situation and capital market. Similarly, listed companies are the representatives of the leading companies in the medical device segmentation industry. The listing and development of medical device companies over the years has also represented the industry to some extent. The overall development trend.
Stationary Scissor Lift:
8.0t Basement Small Cargo Lift is used for transfer cargo between different floors.
55t 60t 65t Stationary Lift Table can install on the ground directly or make one pit. Hydraulic drive, steady working and simple operation.
Cheap Fixed Lift Table could be controlled at any floor. Control panels are available at the designated floors and one is on the lift platforms.
Stationary Scissor Lift Specification Table:
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG0.5-4.5 |
750 |
4500 |
500 |
2000*1000 |
|
SJG0.5-5.0 |
850 |
5000 |
500 |
2000*1000 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG1.0-3.3 |
840 |
3300 |
1000 |
1900*1500 |
|
SJG1.0-4.3 |
860 |
4300 |
1000 |
2500*2500 |
|
SJG1.0-4.5 |
850 |
4500 |
1000 |
2000*1500 |
|
SJG1.0-6.0 |
1230 |
6000 |
1000 |
2200*1500 |
|
SJG1.0-7.5 |
990 |
7500 |
1000 |
2200*1800 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG2.0-3.5 |
1000 |
3500 |
2000 |
2200*1500 |
|
SJG2.0-4.5 |
900 |
4500 |
2000 |
2200*1500 |
|
SJG2.0-4.8 |
700 |
4800 |
2000 |
3600*2000 |
|
SJG2.0-6.8 |
1400 |
6800 |
2000 |
2550*2200 |
|
SJG2.0-7.5 |
1065 |
7500 |
2000 |
2400*2400 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG3.0-4.5 |
1060 |
4500 |
3000 |
2200*1800 |
|
SJG3.0-7.2 |
860 |
7200 |
3000 |
5500*3000 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG4.5-3.5 |
760 |
3500 |
4500 |
4000*2000 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG5.0-1.8 |
960 |
1800 |
5000 |
3500*2500 |
|
SJG5.0-5.4 |
950 |
5400 |
5000 |
5000*1600 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG8.0-2.5 |
850 |
2500 |
8000 |
6500*4500 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG12-3.0 |
950 |
3000 |
12000 |
5500*2800 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG15-4.5 |
1150 |
4500 |
15000 |
8000*2200 |
|
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
|
SJG20-5.0 |
1200 |
5000 |
20000 |
6000*3000 |
Application Area:
Stationary Scissor Lift is mainly used in the production line and the storehouse papermaking medicine and other industries. It can be used as the delivery lift to transport goods smoothly, safely, reliably and conomically.If you have any questions, please contact with us directly. Stationary Scissor Lift are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.
Stationary Scissor Lift
Hydraulic Scissor Lift,Stationary Cargo Lift,Stationary Scissor Goods Lift,Scissor Cargo Lift
Jinan East Machinery Co.,Ltd. , http://www.jneastmach.com