End Suction Water Pump Water Pumping Machine

Model NO.: DP-IS
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Water Pump
Industry: Fisheries Pump
Media: Sea Water Pump
Performance: Wear Pump
Theory: Centrifugal Pump
Drive: Electric Motor/ Diesel Engine
Voltage: 220V/380V/410V/460V/High Voltage
Frequeccy: 50Hz/60Hz
Color: as Customer Required
Warranty: 1 Year
Trademark: DEPON
Transport Package: Wooden Case
Specification: IS50-32-125 ~ IS200-150-400
Origin: Hebei
HS Code: 8413709990
Model NO.: DP-IS
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Water Pump
Industry: Fisheries Pump
Media: Sea Water Pump
Performance: Wear Pump
Theory: Centrifugal Pump
Drive: Electric Motor/ Diesel Engine
Voltage: 220V/380V/410V/460V/High Voltage
Frequeccy: 50Hz/60Hz
Color: as Customer Required
Warranty: 1 Year
Trademark: DEPON
Transport Package: Wooden Case
Specification: IS50-32-125 ~ IS200-150-400
Origin: Hebei
HS Code: 8413709990
End Suction Water Pump Water Pumping Machine
End Suction Water Pump Water Pumping Machine


Introduction:

Depon IS serial centrifugal water pumps are single stage suction cantilever centrifugal pumps. They are used to deliver clean water and the liquids of which the physical and chemical properties are similar to clean water.

Application: 

• Domestic water boosters
• Sprinkler/Firefighting
• Water treatment plants
• Seawater pumping
• Chemical / Processing
• Food processing
• Irrigation
• Designed for heavy duty
• industrial use including belt
• drive applications.
• General water transfer in processing plants, mines, construction sites and Irrigation.

Technical Data

Head:Up to 160m
Discharge:Up to 250 litres per sec
Pressure rating: 1600kPa

Features
• Heavy duty oil lubricated taper roller

 Bearings.
• Australian designed and manufactured.
• Superior hydraulic design and manufacturing methods produce significantly higher efficiencies for lower running costs and reduced

 Maintenance
• Heavy duty design type 316 shaft
• High strength cast iron bearing housing
• Mechanical seals fitted as standard with single on-shaft mechanical seal
• Superior hydraulic design and manufacturing processes, together with double curvature impeller blades, provide highly efficient suction performance, higher speed capabilities and greater performance for reduced running costs and maintenance.
• Taper mounted impeller for positive drive and easy removal
• Replaceable stainless steel or zinc free bronze wear rings
• Reusable "O" ring body seals in Viton as standard and Teflon or EPDM as options
• AS2129 Flanges
• Standard tappings- Volute drain plug, suction flange tapping for suction gauge and discharge tapping for pressure gauge

Model Notation:

IS 65-40-200 A D
IS - Model Series
65 - Inlet Diameter (mm)
40 - Outlet Diameter (mm)
200 - Nominal Impeller Diameter (mm)
A - Sign of cut impeller

Note: The impeller form consists of such five kinds as O, A, B, C and Z, respectively standing for:

         O- Impeller prototype

         A- Impeller OD cut for the first time

         B- Impeller OD cut for the second time

         C- Impeller OD cut for the third time

         Z- Increased impller OD

End Suction Water Pump Water Pumping Machine
 

Models & Performance

Model Flow Lift head Rotation speed Motor power Inlet Diameter Outlet Diameter
(m3/h) (m) (r/min) (kw) (mm) (mm)
IS50-32-125 12.5 20 2900 2.2 50 32
6.3 5 1450 0.55 50 32
IS50-32-160 12.5 32 2900 3 50 32
6.3 8 1450 0.55 50 32
IS50-32-200 12.5 50 2900 5.5 50 32
6.3 12.5 1450 0.75 50 32
IS50-32-250 12.5 80 2900 11 50 32
6.3 20 1450 1.5 50 32
IS65-50-125 25 20 2900 3 65 50
12.5 5 1450 0.55 65 50
IS65-50-160 25 32 2900 5.5 65 50
12.5 8 1450 0.75 65 50
IS65-40-200 25 50 2900 7.5 65 40
12.5 12.5 1450 1.1 65 40
IS65-40-250 25 80 2900 15 65 40
12.5 20 1450 2.2 65 40
IS65-40-315 25 125 2900 30 65 40
12.5 32 1450 4 65 40
IS80-65-125 50 20 2900 5.5 80 65
25 5 1450 0.75 80 65
IS80-65-160 50 32 2900 7.5 80 65
25 8 1450 1.5 80 65
IS80-50-200 50 50 2900 15 80 50
25 12.5 1450 2.2 80 50
IS80-50-250 50 80 2900 22 80 50
25 20 1450 3 80 50
IS80-50-315 50 125 2900 37 80 50
25 32 1450 5.5 80 50
IS100-80-125 100 20 2900 11 100 80
50 5 1450 1.5 100 80
IS100-80-160 100 32 2900 15 100 80
50 8 1450 2.2 100 80
IS100-65-200 100 50 2900 22 100 65
50 12.5 1450 4 100 65
IS100-65-250 100 80 2900 37 100 65
50 20 1450 5.5 100 65
IS100-65-315 100 125 2900 75 100 65
50 32 1450 11 100 65
IS125-100-200 200 50 2900 45 125 100
100 12.5 1450 7.5 125 100
IS125-100-250 200 80 2900 75 125 100
100 20 1450 10 125 100
IS125-100-315 200 125 2900 110 125 100
100 32 1450 15 125 100
IS125-100-400 100 50 1450 30 125 100
IS150-125-250 200 20 1450 18.5 150 125
IS150-125-315 200 32 1450 30 150 125
IS150-125-400 200 50 1450 45 150 125
IS200-150-250 400 20 1450 37 200 150
IS200-150-315 400 32 1450 55 200 150
IS200-150-400 400 50 1450 90 200 150
 End Suction Water Pump Water Pumping Machine
End Suction Water Pump Water Pumping Machine

End Suction Water Pump Water Pumping Machine

FAQ

A: What kind of company you are?
Q: Shijiazhuang Depon Pump Company is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 



Welcome inquiry! 
Serena Zhang 

Contact: 
Mob: +86 158 3083 2057
Tel: +86 312 8929296
Fax: +86 312 3085383

 
 
  End Suction Water Pump Water Pumping Machine
End Suction Water Pump Water Pumping Machine


Introduction:

Depon IS serial centrifugal water pumps are single stage suction cantilever centrifugal pumps. They are used to deliver clean water and the liquids of which the physical and chemical properties are similar to clean water.

Application: 

• Domestic water boosters
• Sprinkler/Firefighting
• Water treatment plants
• Seawater pumping
• Chemical / Processing
• Food processing
• Irrigation
• Designed for heavy duty
• industrial use including belt
• drive applications.
• General water transfer in processing plants, mines, construction sites and Irrigation.

Technical Data

Head:Up to 160m
Discharge:Up to 250 litres per sec
Pressure rating: 1600kPa

Features
• Heavy duty oil lubricated taper roller

 Bearings.
• Australian designed and manufactured.
• Superior hydraulic design and manufacturing methods produce significantly higher efficiencies for lower running costs and reduced

 Maintenance
• Heavy duty design type 316 shaft
• High strength cast iron bearing housing
• Mechanical seals fitted as standard with single on-shaft mechanical seal
• Superior hydraulic design and manufacturing processes, together with double curvature impeller blades, provide highly efficient suction performance, higher speed capabilities and greater performance for reduced running costs and maintenance.
• Taper mounted impeller for positive drive and easy removal
• Replaceable stainless steel or zinc free bronze wear rings
• Reusable "O" ring body seals in Viton as standard and Teflon or EPDM as options
• AS2129 Flanges
• Standard tappings- Volute drain plug, suction flange tapping for suction gauge and discharge tapping for pressure gauge

Model Notation:

IS 65-40-200 A D
IS - Model Series
65 - Inlet Diameter (mm)
40 - Outlet Diameter (mm)
200 - Nominal Impeller Diameter (mm)
A - Sign of cut impeller

Note: The impeller form consists of such five kinds as O, A, B, C and Z, respectively standing for:

         O- Impeller prototype

         A- Impeller OD cut for the first time

         B- Impeller OD cut for the second time

         C- Impeller OD cut for the third time

         Z- Increased impller OD

End Suction Water Pump Water Pumping Machine
 

Models & Performance

Model Flow Lift head Rotation speed Motor power Inlet Diameter Outlet Diameter
(m3/h) (m) (r/min) (kw) (mm) (mm)
IS50-32-125 12.5 20 2900 2.2 50 32
6.3 5 1450 0.55 50 32
IS50-32-160 12.5 32 2900 3 50 32
6.3 8 1450 0.55 50 32
IS50-32-200 12.5 50 2900 5.5 50 32
6.3 12.5 1450 0.75 50 32
IS50-32-250 12.5 80 2900 11 50 32
6.3 20 1450 1.5 50 32
IS65-50-125 25 20 2900 3 65 50
12.5 5 1450 0.55 65 50
IS65-50-160 25 32 2900 5.5 65 50
12.5 8 1450 0.75 65 50
IS65-40-200 25 50 2900 7.5 65 40
12.5 12.5 1450 1.1 65 40
IS65-40-250 25 80 2900 15 65 40
12.5 20 1450 2.2 65 40
IS65-40-315 25 125 2900 30 65 40
12.5 32 1450 4 65 40
IS80-65-125 50 20 2900 5.5 80 65
25 5 1450 0.75 80 65
IS80-65-160 50 32 2900 7.5 80 65
25 8 1450 1.5 80 65
IS80-50-200 50 50 2900 15 80 50
25 12.5 1450 2.2 80 50
IS80-50-250 50 80 2900 22 80 50
25 20 1450 3 80 50
IS80-50-315 50 125 2900 37 80 50
25 32 1450 5.5 80 50
IS100-80-125 100 20 2900 11 100 80
50 5 1450 1.5 100 80
IS100-80-160 100 32 2900 15 100 80
50 8 1450 2.2 100 80
IS100-65-200 100 50 2900 22 100 65
50 12.5 1450 4 100 65
IS100-65-250 100 80 2900 37 100 65
50 20 1450 5.5 100 65
IS100-65-315 100 125 2900 75 100 65
50 32 1450 11 100 65
IS125-100-200 200 50 2900 45 125 100
100 12.5 1450 7.5 125 100
IS125-100-250 200 80 2900 75 125 100
100 20 1450 10 125 100
IS125-100-315 200 125 2900 110 125 100
100 32 1450 15 125 100
IS125-100-400 100 50 1450 30 125 100
IS150-125-250 200 20 1450 18.5 150 125
IS150-125-315 200 32 1450 30 150 125
IS150-125-400 200 50 1450 45 150 125
IS200-150-250 400 20 1450 37 200 150
IS200-150-315 400 32 1450 55 200 150
IS200-150-400 400 50 1450 90 200 150
 End Suction Water Pump Water Pumping Machine
End Suction Water Pump Water Pumping Machine

End Suction Water Pump Water Pumping Machine

FAQ

A: What kind of company you are?
Q: Shijiazhuang Depon Pump Company is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 



Welcome inquiry! 
Serena Zhang 

Contact: 
Mob: +86 158 3083 2057
Tel: +86 312 8929296
Fax: +86 312 3085383

 
 
 

Reflective Tape

Reflective Tape,Reflective Stickers ,Conspicuity Tape ,White Reflective Tape

Reflective Safety Clothing Co., Ltd. , http://www.nbreflectivetape.com

Posted on