Xenon lamp aging test chamber adopts electromagnetic expansion method as equipment energy-saving design and imported special human-machine interface temperature and humidity controller. It is more and more connected to emerging technologies, reliable performance, simple operation, control technology, etc. to catch up with the current level, cost-effective The same type of imported test equipment is the ideal equipment for conducting full-light spectrum test.
For an increasingly better xenon lamp aging test chamber, the efficiency of the refrigeration system is even higher. Therefore, for the core components of the refrigeration system, the probability of failure and the frequency of failures are greatly reduced. But once the test chamber compressor fails, it will be a fatal failure for the equipment. Therefore, we should pay enough attention to the fault of the compressor, and we must strictly follow the following inspection steps and solutions:
First, check the steps:
1. Please check the location of the equipment, if there is more than 30 cm away from the wall;
2. Is it a confined space in four weeks?
Second, the solution:
1. If not, please keep the position of the machine more than 30 centimeters around, because the poor heat dissipation will cause the running current of the compressor to rise, resulting in overcurrent protector action;
2. If the space is surrounded by confined space, it will cause the environment to have a temperature rise, and it will cause the compressor's operating current to rise, resulting in an over-current protector (heat-reserve power). Therefore, keep the air around;
3. After the above problems are solved, please install the over-current protector under the three electromagnetic switches in the computer room. Press the reset button to the next step. If you hear a click, it means that the one that was in control of the compressor was overloaded. However, this time it has returned. At this time, please transfer the current setting value to 1.25 times the rated current of the compressor.
As long as the compressor is not a serious, irreversible failure, it requires parts replacement and maintenance. I believe that as long as we follow the above inspection steps and solutions, ordinary compressor abnormalities will be solved and we will also have a normal xenon lamp aging test box.
Eurocrane Crane kits guarantee quality, efficiency and reliability. Our Overhead Crane Kit is desighed for Lifting Heavy Loads. Bridge Crane Kit suits every situation you meet. Industrial Crane is a type of machine, generally equipped with a Hoist rope, wire ropes or chains, and sheaves, that can be used both to lift and lower materials and to move them horizontally. When you meet this kind of situation, Eurocrane Crane kits are good choice for you to use in different environment.
Crane Kit,Bridge Crane Kit,Overhead Crane Kit,Crane Kit for Lifting Heavy Loads
Eurocrane (China) Co., Ltd. , https://www.overhead-crane.com