Measuring sign pile | Measuring sign pile manufacturers

Measuring sign piles is a very important facility in our daily life. It guarantees our gas and electricity safety because it is the god of protection for underground gas or cable ducts. Next, the staff of Hebei Hongxing Fiberglass Co., Ltd. introduced the product for everyone.

  

Zaoqiang Hongxing FRP Co., Ltd. specializes in producing measuring sign piles, with various specifications, many models, and high cost performance. It can be customized according to the needs of users. phone.

测量标志桩

The performance of the measuring mark pile is introduced:

 

1 , the color of the measuring mark pile is not easy to fade, keep it bright. The surface text is wear-resistant and lasting, and it is truly maintenance-free. It does not require maintenance such as painting and printing. It can also be customized according to the information such as station number, mileage, route direction arrow, maintenance telephone or company name, company LOGO, etc. provided by the user unit .

2 , has a good insulation, to prevent leakage.

3 , corrosion resistance, wear resistance, high temperature, even if the environment is no longer bad, can also be used very well, the use of time is very good.

4 , light weight, installation and transportation more convenient and quick, can save a large part of the cost.

5 , can withstand strong impact, not easy to deformation.

测量标志桩

The use of measuring marker piles is introduced:

 

The use of measuring sign piles is very extensive. It is mainly used as a sign and warning board for the passage of power, communication, water, gas, and railway geography pipelines. It can also be used in busy markets, bushes, green belts, scenic areas, and rooftops. Pipeline path indications on both sides of the pipe. In recent years, it has been applied very frequently and has played a role in warning and protecting underground pipelines.

Measuring sign pile installation methods and precautions:

( 1 ) There are two kinds of conditions for the measurement of the marker piles. One is that the upper part can be installed and installed directly above the pipeline; the other is when there is no installation condition directly above the pipeline, but when it must be installed, it can be set in relative terms. Closer to the roadside greenbelt, but set the pipeline to the schematic diagram on the measuring signpost to indicate the specific location of the pipeline. The requirements for measuring the installation spacing of sign piles are based on the principle of observation, taking into account the economy and practicality. Since the field of vision is relatively good, combined with the actual application of the current enterprise, it is appropriate to use 50 ~ 80m .

( 2 ) For measuring the height of the marker piles, it may be appropriate to increase the height of the marker piles for ease of observation. The measurement piles for the neighborhood tubes can be appropriately lower, and no specific regulations will be made . Each company decides on its own according to the specific conditions . a lot of content, its content is roughly divided into internal and external information, external information is a fundamental objective signs pile set of measurements, it is necessary to pack inlet duct ownership company name, contact telephone warning language. inform pipeline ownership company name, telephone may To facilitate construction of other construction companies is to contact or notify the pipeline ownership unit in case of accidents. The warning language may include “under the gas pipeline, no excavation,” “protection of pipelines, everyone’s responsibility,” and so on. Function . For information, including measuring sign piles, pipe area name, corporate identity, etc., the enterprise can control it without strict requirements .

Color (3) to measure signs pile selection based on the following considerations, it must first clear, easy to observe; secondly in selecting colors to highlight the gas industry survey marks the pile, and telecommunications and other industries to measure signs pile identifies the content should be different. Clear.

Measuring mark use range:

Ground signs for gas, water, petrochemical, broadcasting, power, communications, and embedded fiber optic cables. Performance characteristics: strong impact resistance, impact resistance, aging resistance, good temperature performance, long service life. Anti-corrosion, no deformation, no fading, conspicuous logo. The cost is low and the effect is good. Lightweight, easy to install and easy to use. Beautiful and flame-retardant.


Flame Retardant Plasticizer

Flame Retardant Plasticizer

Bisphenol A Bis-(Diphenyl Phosphate)(BDP) 5945-33-5/181028-79-5

Triethyl Phosphate(TEP) 78-40-4

Resorcinol bis (diphenyl phosphate)(RDP) 125997-21-9/57583-54-7

diethyl bis(2-hydroxyethyl)aminomethylphosphonate 2781-11-5

Tricresyl phosphate(TCP) 1330-78-5

Isopropylphenyl phosphate(IPPP) 68937-41-7

Isopropyl phenyl diphenyl phosphate(IPDPP ) 28108-99-8

2-Ethylhexyl Diphenyl Phosphate(EHDP) 1241-94-7

Isodecyl diphenyl phosphate(IDPP) 29761-21-5

Tributyl Phosphate(TBP) 126-73-8

Triaryl phosphates butylated 68952-33-0

Trixylenyl phosphate(TXP) 25155-23-1

Tris(2-butoxyethyl) phosphate(TBEP) 78-51-3

Cresyl Diphenyl Phosphate(CDP) 26444-49-5

Tri-isobutyl Phosphate(TIBP) 126-71-6

Triphenyl phosphate(TPP) 115-86-6

Tri (2-ethylhexyl) Phosphate 78-42-2

Trimethyl phosphate(TMP) 512-56-1

Tris (1,3-dichloroisopropyl) phosphate(TDCP) 13674-87-8

Oligomeric chloroalkyl phosphate ester 109640-81-5

Tris (2-chloropropyl) phosphate(TCPP) 13674-84-5

Tris(2-chloroethyl)phosphate (TCEP) 115-96-8

Flame Retardants for Plastics,Flame Retardant Plastic Compound,Flame Polymeric Plasticizers,Flame Retardant For EPS & XPS,Flame Retardant For PP,Flame Retardant For PU

Shandong Novista Chemicals Co.,Ltd (Novista Group) , https://www.novistachem.com

Posted on