The Consumer Product Safety Commission (CPSC) said this morning that there is a risk of short circuit in the dryer power supply produced by LG, which may cause fire damage to people. They are jointly recalling the company and recalling a total of 98,000 units.
CPSC claims that the recalled product was produced by LG Electronics (Tianjin) Electric Co., Ltd. Due to the short circuit of the power supply connected to the dryer compressor, causing fire and consumer burns, the CPSC required LG to initiate an active recall of the product.
CPSC pointed out that LG once again received four reports of accidents caused by recalled products. One of the incidents caused great damage. At present, there have been no reports of consumers being injured. However, the agency warns that consumers who are using recalled products should stop using it.
The recalled products were mainly portable 30-pin dryers sold under the Goldstar and Comfort-Aire brand names and printed on the front of the camera. The product is white and the switch button is red.
The results show that the casting aluminum alloy with good casting property or deformation aluminum alloy with good processing plasticity can be obtained by adding certain Ba Au Du element.
2. Good conductivity and thermal conductivity.
The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3. The density is small.
The density of aluminum and aluminum alloy is close to 2.7 g / about 1 / 3 of that of iron or copper.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.
CPSC claims that the recalled product was produced by LG Electronics (Tianjin) Electric Co., Ltd. Due to the short circuit of the power supply connected to the dryer compressor, causing fire and consumer burns, the CPSC required LG to initiate an active recall of the product.
CPSC pointed out that LG once again received four reports of accidents caused by recalled products. One of the incidents caused great damage. At present, there have been no reports of consumers being injured. However, the agency warns that consumers who are using recalled products should stop using it.
The recalled products were mainly portable 30-pin dryers sold under the Goldstar and Comfort-Aire brand names and printed on the front of the camera. The product is white and the switch button is red.
Aluminum Polishing Sheet is a special Aluminum Sheet.Its surface has been polished hence gives good performance in surface condition.The advantage of aluminum sheet is as follows:
1. Easy to process.
The results show that the casting aluminum alloy with good casting property or deformation aluminum alloy with good processing plasticity can be obtained by adding certain Ba Au Du element.
2. Good conductivity and thermal conductivity.
The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3. The density is small.
The density of aluminum and aluminum alloy is close to 2.7 g / about 1 / 3 of that of iron or copper.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.
Aluminum Panel Sheet,Polished Aluminum Sheet,Polished Aluminium Sheet,Aluminium Profile Sheet
Trumony Aluminum Limited , https://www.szaluminumplate.com