Model NO.: 200 Series
HS Code: 8481
Model NO.: 200 Series
HS Code: 8481
Founded in 2001, we are specialized in design & manufacture stainless steel valve for industrial fluid control system. Our products include pneumatic angle seat valve, shuttle valve, ball valve, butterfly valve, pressure reducing valve, steam trap, check valve and strainer, which are widely exported to USA, Europe, Asia, Africa, in total 62 countries.
Technical data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M/CF8 |
| Seals  Material |  EPDM/FKM |
| Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
| Fluid Temperature | -20ºC - +150ºC |
| Ambient Temperature | -20ºC - +80ºC |
| Control Type | Normally closed,Normally open,Double acting |
| Connection | Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000. |
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:
CONTACT US:
 Founded in 2001, we are specialized in design & manufacture stainless steel valve for industrial fluid control system. Our products include pneumatic angle seat valve, shuttle valve, ball valve, butterfly valve, pressure reducing valve, steam trap, check valve and strainer, which are widely exported to USA, Europe, Asia, Africa, in total 62 countries.
Technical data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M/CF8 |
| Seals  Material |  EPDM/FKM |
| Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
| Fluid Temperature | -20ºC - +150ºC |
| Ambient Temperature | -20ºC - +80ºC |
| Control Type | Normally closed,Normally open,Double acting |
| Connection | Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000. |
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:
CONTACT US:
Â
Terex Rigid Dump Trucks perform extremely well in tough mining conditions, and are very easily maintained at a low cost of ownership.Our range of Rigid Dump Trucks provides the perfect balance of power, torque, and effective gearing coupled with optimum weight distribution to move more material in less time.
Our company is specializing in off-highway mining dump trucks and Spare Parts.we can supply Terex Rigid Dump Truck parts. We have terex 3303,3304,3305,3307,TR50, TR60, and TR100 for your needs.
Terex Dump Trucks,Terex Mining Dump Truck,Terex Rigid Dump Truck,Terex Haul Truck
Chengdu Svoda Machinery Equipment Co.,Ltd , https://www.svdequips.com