25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment

Model NO.: Nan Cheng
Trademark: Nan Cheng
Transport Package: Wooden Packing
Specification: Sophisticated Filters
Origin: Jiangsu, China
Model NO.: Nan Cheng
Trademark: Nan Cheng
Transport Package: Wooden Packing
Specification: Sophisticated Filters
Origin: Jiangsu, China

How the Water Treatment and Bottling Plant Works

1.A semi permeable membrane in a reverse osmosis system only allows certain things to pass through.
2.This membrane passes water easily but also prevents many other contaminants from passing by trapping them.
3.Water is normally on both sides of the membrane, the water on each side has a different concentration of dissolved minerals.
4.The water in the less concentrated solution tries to dilute the more concentrated solution.
5.Water will pass through the membrane from the lower concentration side to the greater concentration side.
6.The osmotic pressure (see diagram) created by the difference in water levels, will counter the diffusion process forming an equilibrium between the two sides.

 

Water Treatment and Bottling Plant Technical route and flow diagram instructions

The technical route is as following:

Raw tank-->Booster pump -->Quartz sand filter-->activated carbon filter--->Anti-scalant dosing-->Sediment filter-->High pressure pump-->Reverse osmosis desalination device-->Permeate tank

Materials of Construction

Skid Frame: SS304
Membrane Elements:Hydraulics CAP3-8040
Membrane Housings: SS304
Low pressure piping: SS304
High pressure piping: SS304
Pump and Motor
Pump: 304SS vertical multi-stage centrifugal
Motor: TEFC, 380/460 VAC, 3-phase, 50/60 Hz.
Standard Features
8" x 40" High rejection membrane elements
5-micron sediment pre-filter housing
Automatic inlet solenoid valve
PLC control
Product water conductivity monitor
Operating pressure gauges
Product and concentrate flow meters
Concentrate and recycle flow control valves
Low inlet pressure switch with shutdown alarm
Auto/Manual wash
Capacity:500-50000Liter per Hour
SS304 construction
USA Brand Hydraulics membrane
SS304 membrane housing
SS304 piping and fitting
Multi-stage SS304 high-pressure centrifugal pump
Schneider,Siemens electronic parts
Nominal Recovery:65-75%
Nominal Salt Rejection:99.60%
Auto/Manual backwash
Low inlet pressure switch with shutdown alarm
Option:Ozone generator,UV,Storge tank etc.


Optional Equipment Available

Atmospheric storage tanks with level control and repressurization pump
Pressurized storage vessels
UV
Ozone generator
Membrane clean-in-place (CIP) systems
Pretreatment chemical injection systems

Model Production of water (Ton/h ) Motor power (kw) Membrane Entrance Diameter (mm) Size(L*W*H) ( cm) Weight(Kg)
RO-0.5 0.5 1.1 4040 32 170*70*170 200
RO-1 1 1.5 4040 32 155*90*180 200
RO-2 2 3 4040 38 480*70*200 300
RO-3 3 4 8040 48 470*100*230 400
RO-4 4 5 8040 48 470*100*230 450
RO-5 5 7 8040 60 500*120*230 600
RO-10 10 11 8040 60 900*200*200 800
RO-15 15 16 8040 72 1000*187*300 1000
RO-20 20 30 8040 60 1000*180*400 1550
 

25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment



25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment














25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment
25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment
25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment
 

How the Water Treatment and Bottling Plant Works

1.A semi permeable membrane in a reverse osmosis system only allows certain things to pass through.
2.This membrane passes water easily but also prevents many other contaminants from passing by trapping them.
3.Water is normally on both sides of the membrane, the water on each side has a different concentration of dissolved minerals.
4.The water in the less concentrated solution tries to dilute the more concentrated solution.
5.Water will pass through the membrane from the lower concentration side to the greater concentration side.
6.The osmotic pressure (see diagram) created by the difference in water levels, will counter the diffusion process forming an equilibrium between the two sides.

 

Water Treatment and Bottling Plant Technical route and flow diagram instructions

The technical route is as following:

Raw tank-->Booster pump -->Quartz sand filter-->activated carbon filter--->Anti-scalant dosing-->Sediment filter-->High pressure pump-->Reverse osmosis desalination device-->Permeate tank

Materials of Construction

Skid Frame: SS304
Membrane Elements:Hydraulics CAP3-8040
Membrane Housings: SS304
Low pressure piping: SS304
High pressure piping: SS304
Pump and Motor
Pump: 304SS vertical multi-stage centrifugal
Motor: TEFC, 380/460 VAC, 3-phase, 50/60 Hz.
Standard Features
8" x 40" High rejection membrane elements
5-micron sediment pre-filter housing
Automatic inlet solenoid valve
PLC control
Product water conductivity monitor
Operating pressure gauges
Product and concentrate flow meters
Concentrate and recycle flow control valves
Low inlet pressure switch with shutdown alarm
Auto/Manual wash
Capacity:500-50000Liter per Hour
SS304 construction
USA Brand Hydraulics membrane
SS304 membrane housing
SS304 piping and fitting
Multi-stage SS304 high-pressure centrifugal pump
Schneider,Siemens electronic parts
Nominal Recovery:65-75%
Nominal Salt Rejection:99.60%
Auto/Manual backwash
Low inlet pressure switch with shutdown alarm
Option:Ozone generator,UV,Storge tank etc.


Optional Equipment Available

Atmospheric storage tanks with level control and repressurization pump
Pressurized storage vessels
UV
Ozone generator
Membrane clean-in-place (CIP) systems
Pretreatment chemical injection systems

Model Production of water (Ton/h ) Motor power (kw) Membrane Entrance Diameter (mm) Size(L*W*H) ( cm) Weight(Kg)
RO-0.5 0.5 1.1 4040 32 170*70*170 200
RO-1 1 1.5 4040 32 155*90*180 200
RO-2 2 3 4040 38 480*70*200 300
RO-3 3 4 8040 48 470*100*230 400
RO-4 4 5 8040 48 470*100*230 450
RO-5 5 7 8040 60 500*120*230 600
RO-10 10 11 8040 60 900*200*200 800
RO-15 15 16 8040 72 1000*187*300 1000
RO-20 20 30 8040 60 1000*180*400 1550
 

25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment



25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment














25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment
25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment
25cube/Hour Dissolved Air Flotation Units for Waste Water Treatment
 

The pneumatic lifting table is a simplification of the automatic lifting table. It eliminates the need for a motor or compressor, and adjusts the air pressure bar manually to achieve the function of lifting

advantage:

1. Low price and high cost performance

2. No need to connect to electricity, no oil, good safety

Disadvantages:

1. The stability is not high

2. It takes a little effort to raise and lower, and some buttons need to be lifted by hand to achieve the purpose of up and down

Pneumatic Standing Desk

Adjustable Office Desk,Standing Computer Desk,Pneumatic Standing Desk,Office Desk Adjustable Table

Suzhou Uplift Intelligent Technology Co., Ltd , https://www.upliftec.com

Posted on